Apache’s Contract Manufacturing group provides design, support and fabrication solutions for custom metal parts and components to a variety of industries.
Our in-house passivation and electropolishing services allow Apache to provide all-inclusive control over the fabrication and stainless finishing process providing expedient project turnaround.
Services include: Assembly, Custom Fabrication, Gantry Drilling, Laser Cutting, ASME Certified Welding, and Stainless Finishes.
Apache Contract Manufacturing
Apache EP Passivation
Our tank measure 20 ft. long x 5.5 ft. wide x 6 ft. deep. Projects over that size limit may be passivated with two dips or a hand spraying option.
Passivation is the removal of excess iron or iron compounds from the stainless surface. No actual metal is removed during passivation. Pickle passivation is the immersion of metal in a pickling bath such as nitric-hydroflouric acid. The process removes metal such as impurities and heat marks from welds.
Electropolishing is an electro-chemical process that removes surface material from stainless steel. This process typically starts with an immersion of the component into controlled bath of electrolyte that is charged with a DC power supply. The finish has a mirror appearance. Apache’s before and after tests have shown improvement in RA (roughness average) up to 50% smoother, depending on the material.
Electroplating is the process of plating one metal onto another by hydrolysis, most commonly for decorative purposes or to prevent corrosion of a metal. There are also specific types of electroplating such as copper plating, silver plating, and chromium plating.
The main difference between pickle passivation and electropolishing is the appearance and RA (roughness average) of the stainless material. In the photo, an electropolished sample is shown above a pickle passivated sample. The pickle passivated sample has a white appearance, while the electropolished sample has a mirror-like, shiny finish.
No, our in-house surfaces include passivation, pickle passivation, electropolishing and mechanical polishing.
Our lead time is typically 7- 10 days for average projects, which can fluctuate depending on our production schedule. On large orders we will quote you a time frame for delivery. We offer expediting services for a fee.
Our EP tank size is 7 ft. long x 6 ft. wide x 5 ft. deep. For components that don’t fit in our tank, we build fixtures for products that allow us to perform electropolishing without dipping the product.
We can fabricate Heads, anywhere from 30” (2’6”) to 192” (16’) Diameter, with the thickness being 12 ga. to ¾” Stainless and up to 7/8” Carbon.
350lbs. up to 14 ft.
Our laser can take sizes from 60” X 156” up to ½” plate Carbon, Aluminum, or Stainless Steel.
We utilize a Strippet/LVD Impuls 4000 watt laser cutting system that can handle pattern sizes of 120" x 156".
We do everything from small weldments and general welding to heavy gauge welding. Our tenured welders are ASME certified.
We can look at drawings, explanation of work to be done and discuss options with you.
Our NC controlled Gantry Drilling machine is capable of drilling part and weldments within 96" x 96" x 20".